Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Functions and operation by valve

10 Structure, function and maintenance standard UEN00100-00 LS select valve 1 Function q Prevents high LS pressure from the swinging from entering the LS circuit of work valves while the swinging and work equipment are in combined operation. Operation 1. If pilot pressure (BP) is OFF q Since pilot pressure (BP) is OFF, piston (3) is pressed to the left by spring (2). q Prevents high pressure generated during swing drive and improves operability of work equipment. q When swing-operated, swing LS pressure (P1) enters port (A) after passing swing spool (5). q Valve (1) is pressed to the left and ports (A) and (B) are interconnected. q Swing LS pressure (P1) flows to LS shuttle valve (8). 2.

If pilot pressure (BP) is ON q If pilot pressure (BP) is ON, BP pressure con- tracts spring (2), and piston (3) shifts to the right. q Valve (1) is pressed to the right and intercon- nection between ports (A) and (B) is closed. q Swing LS pressure (P1) stops flowing to LS shuttle valve (8). q If swing LS pressure (P1) rises, other LS cir- cuits are not affected. a The illustration shows the state of simulta- neous operation of swinging and R.H. travel. [(BP) pressure ON] 1. Valve 2. Spring 3. Piston 4. Piston 5. Swing spool 6. L.H. travel spool 7. Arm spool 8. LS shuttle valve 9. LS circuit PC210, 230, 240-8 37