UEN00100-00 10 Structure, function and maintenance standard 3. When returning pressurized oil to the main valve from the work equipment cylinder When the piping is free of burst q Holding pressure of the work equipment cylin- der is led to chamber (b) and check valve (5) closes. If the piping is bursted q If piping (A) bursts between the control valve and the work equipment cylinder. q Pressurized oil in chamber (a) flows out to the bursted portion but resupplied from chamber (b). q Pilot pressure from the PPC valve is led to port (PI) and reaches [Pilot Pressure > Force of Spring (3)] (area of d).
q Since pressurized oil flows via opening (c) of spool (1), a sudden drop of the cylinder is pre- vented. q Spool (1) moves to the right to the standby position. (1st stage stroke) q At this point, chambers (a) and (b) are not interconnected. q Pilot pressure further rises, and reaches [Pilot pressure > Force of spring (2)] (area of d). q Spool (1) moves further to the right, and cham- bers (a) and (b) are interconnected. (2nd stage stroke) q Pressurized oil returns to the control valve from the work equipment cylinder. 50 PC210, 230, 240-8