Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Hydraulic drift prevention valve

10 Structure, function and maintenance standard UEN00100-00 Quick return valve 1 1. When arm OUT Function q When arm OUT, large volume of oil returns from the cylinder bottom. q If the pressure of chamber (b) drops lower than that of port (A), pressure receiving force of the pressure receiving portion [ φ d2 area (S2) (seat diameter area)] on the side of port (A) increases by the sum of the pressure receiving force of pressure receiving portion[ φ d1 area (S1)] on the chamber (b) side of valve (2) and the spring force. q Reduces this pressure loss. q When the arm IN is operated, pilot spool (1) is pushed under the pilot pressure from the PPC valve.

Operation q Pressurized oil in chamber (b) inside the valve is drained via orifice (c). q Or ( φ d2 pressure receiving force > φ d1 pres- sure receiving force + spring force) q Pressurized oil of the arm bottom side flows to orifice (a) o chamber (b) o orifice (c) o drain (T), and the pressure in chamber (b) lowers. q Valve (2) is pressed to the right and pressur- ized oil is led from port (A) to (B). q From port (B), pressurized oil is drained directly to the tank. PC210, 230, 240-8 51