Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — PPC valve

10 Structure, function and maintenance standard UEN00160-00 3. During fine control (When control lever is returned) 4. At full stroke q Disc (5) pushes down piston (4), and retainer (9) pushes down spool (1). q When disc (5) starts to be returned, spool (1) is pushed up by the force of centering spring (3) and the pressure at port (P1). q Fine control hole (f) is shut off from drain chamber (D), and is interconnected to pump pressure chamber (PP). q Because of this, fine control hole (f) is con- nected to drain chamber (D), and the pressur- ized oil at port (P1) is released.

q Therefore, the pilot pressure oil from the self pressure reducing valve passes through fine control hole (f) and flows to chamber (A) from port (P1) to push the control valve spool. q If the pressure of port (P1) is lowered exces- sively, spool (1) is pushed down by metering spring (2). q The oil returning from chamber (B) passes from port (P2) through fine control hole (f') and flows to drain chamber (D). q Fine control hole (f) is shut off from drain chamber (D), and it is almost simultaneously interconnected to pump pressure chamber (PP). q Pump pressure is supplied until the pressure at port (P1) recovers to the level equivalent to the lever position.

q When the spool of the control valve returns, the oil in drain chamber (D) flows in from fine control hole (f') in the valve on the side that is not working. The oil passes through port (P2) and enters chamber (B) to replenish the cham- ber with pressurized oil. PC210, 230, 240-8 29