Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Electrical control system

10 Structure, function and maintenance standard UEN00103-00 3) Function to control when emergency pump drive switch is turned on q Even if any abnormality occurs in the controller or sensor, setting emergency pump drive switch (1) to the “ON” position activates the machine with an absorption torque approxi- mately equivalent to that in E mode. In this case, a constant current flows from the battery to the EPC valve for PC and therefore, the oil pressure is sensed by only the EPC valve for PC. 2) Function to control pump during travel q Traveling the machine in P or ATT mode increases engine speed (N).

q Traveling the machine in E or B mode leaves the working mode unchanged, but raises the pump absorption torque and engine speed (N) to values same as those in P mode. q If the machine travels in L mode, the working mode and engine speed (N) do not change, but the pump absorption torque is increased. PC210, 230, 240-8 15