UEN00227-00 20 Standard value table 6 PC210, 230, 240-8 Applicable model PC210, 210LC, 210NLC, 230NHD-8 Cate- gory Item Measurement condition Unit Standard value for new machine Judgement criteria Swing Swing brake angle • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Swing circle misalignment amount when stopping after one turn • For measuring posture, see Swing 1 deg. (mm) Max. 100 (—) Max. 130 (—) Time taken to start swing • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode:
P mode • Time required for passing points 90° and 180° from starting point • For measuring posture, see Swing 1 90° sec. 3.1 ± 0.3 Max. 3.7 180° sec. 4.4 ± 0.4 Max. 5.5 Time taken to swing • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Time required for 5 more turns after making initial one turn • For measuring posture, see Swing 1 sec. 24.2 ± 2.5 Max. 30 Hydraulic drift of swing • Hydraulic oil temperature:
Within operating range • Engine stopped • Keeping upper structure transverse on slope of 15° • Notching a mating mark on inner and outer races of swing circle • Mating mark misalignment amount during 5 minutes • For measuring posture, see Swing 2 mm 0 0 Leakage from swing motor • Hydraulic oil temperature: Within operating range • Engine running at high idle • Swing lock switch: ON • Leakage amount for one minute during swing relief l/min Max. 5 Max. 10 Travel Travel speed (without load) • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode:
P mode • Time required for track shoes to make 5 turns after making one initial idle turn • For measuring posture, see Travel 1 Lo sec. [PC210] 51.3 ± 5.1 [PC210] 46.2 – 60.4 [PC210LC/NLC] 55.9 ± 5.6 [PC210LC/NLC] 50.3 – 65.5 [PC230NHD] 61.9 ± 6.2 [PC230NHD] 55.7 – 72.5 Mi sec. [PC210] 37.5 ± 3.8 [PC210] 33.7 – 45.3 [PC210LC/NLC] 40.8 ± 4.1 [PC210LC/NLC] 36.7 – 48.9 [PC230NHD] 44.6 ± 4.5 [PC230NHD] 40.1 – 53.6 Hi sec. [PC210] 26.5 ± 1.3 [PC210] 25.2 – 29.8 [PC210LC/NLC] 28.8 ± 1.5 [PC210LC/NLC] 27.3 – 32.3 [PC230NHD] 28.2 ± 1.5 [PC230NHD] 26.7 – 31.6