UEN00227-00 20 Standard value table 8 PC210, 230, 240-8 Applicable model PC210, 210LC, 210NLC, 230NHD-8 Cate- gory Item Measurement condition Unit Standard value for new machine Judgement criteria Work equipment Work equipment speed Boom • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Time required from raise stroke end till bucket touches ground • For measuring posture, see Work equipment 2 RAISE sec. 3.3 ± 0.4 Max. 4.7 LOWER sec. 2.4 ± 0.3 Max. 3.7 Arm • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode:
P mode • Time required from dumping stroke end to digging stroke end • For measuring posture, see Work equipment 3 IN sec. 3.5 ± 0.4 Max. 4.5 OUT sec. 2.7 ± 0.3 Max. 3.5 Bucket • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Time required from dumping stroke end to digging stroke end • For measuring posture, see Work equipment 4 CURL sec. 2.6 ± 0.3 Max. 3.3 DUMP sec. 1.9 ± 0.2 Max. 2.7