20 Standard value table UEN00227-00 PC210, 230, 240-8 15 Applicable model PC240LC, 240NLC-8 Cate- gory Item Measurement condition Unit Standard value for new machine Judgement criteria Work equipment Work equipment speed Boom • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Time required from raise stroke end till bucket touches ground • For measuring posture, see Work equipment 2 RAISE sec. 3.4(+0.5/–0.3) Max. 4.9 LOWER sec. 2.7 ± 0.3 Max. 4.4 Arm • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode:
P mode • Time required from dumping stroke end to digging stroke end • For measuring posture, see Work equipment 3 IN sec. 4.0 ± 0.4 Max. 4.7 OUT sec. 2.9(+0.4/–0.2) Max. 3.5 Bucket • Hydraulic oil temperature: Within operating range • Engine running at high idle • Working mode: P mode • Time required from dumping stroke end to digging stroke end • For measuring posture, see Work equipment 4 CURL sec. 2.7 ± 0.3 Max. 3.3 DUMP sec. 2.1 ± 0.3 Max. 2.7