30 Testing and adjusting UEN00228-00 Checking and adjusting air conditioner compressor belt tension 1 Adjusting a If the belt deflection is abnormal, adjust it according to the following procedure. k Stop the machine on a level ground and lower the work equipment to the ground. 1. Loosen bolts (1) and (2). 2. Move compressor (3) and bracket (4) together to adjust the belt tension. Checking 1. Open the engine hood and remove the belt guard from the top of the air conditioner com- pressor. 3. After positioning compressor (3), tighten bolts (1) and (2). a Check each pulley for breakage, wear of the V-groove, and contact of the V-belt and V-groove.
a If the V-belt is so lengthened that the adjustment allowance is eliminated or it has a cut or a crack, replace it. a If the belt is replaced, adjust their tension again after operating the machine for 1 hour. a After tightening the bolts, check the belt tension again according the above proce- dure. 2. Press the intermediate point of the belt between fan pulley and compressor pulley with a finger and measure deflection (a) of the belt. q Belt pressing force: 98 N {10 kg} 4. After finishing measurement, return the removed parts. PC210, 230, 240-8 23