Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Checking cab tipping stopper

30 Testing and adjusting UEN00228-00 Checking cab tipping stopper 1 a Since the cab tipping stopper is a safety part, check it according to the following procedure. 1. Remove the additional undercover from the rear of the operator's cab. a Perform this step only when the additional undercover is installed. 2. Check the tightening torque of the mounting bolt (2) of the lock plate (1). 3 Bolt (2): 98 – 123 Nm {10 – 12.5 kgm} [ Reference ] q The tightening torque of mounting bolt (4) of cab tipping stopper (3) is different from that of a common bolt 30 mm in diameter. Take care. 3 Bolt (4): 245 – 309 Nm {25 – 31.5 kgm} PC210, 230, 240-8 57