Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting t Operator mode (Outline) a Only outline of the operator mode is described in this section. For details of contents/opera- tion of each function/display, see the Structure, function and maintenance standard, or Opera- tion and Maintenance Manual. a The following are the displays or functions of the operator mode explained in this section (including some items which need special operations). a Display pattern of operator mode The contents of display from the time when starting switch is turned ON to time when screen changes to ordinary screen depends on the setting and condition of the machine. A : When engine start lock is set effective B :

When engine start lock is set ineffective C: When working mode at start is set to breaker mode (B) D: When there is abnormal item in check- before-starting items E : When there is maintenance item which is not maintained after specified interval Display of KOMATSU logo When the starting switch is turned ON, the KOMATSU logo is displayed for 2 seconds. a After the KOMATSU logo is displayed for 2 seconds, the screen changes to “Display of inputting password”, “Display of check of breaker mode (if B mode is set)”, or “Display of check before starting”. a The following screen may be displayed instead of the above Display of inputting password screen.

a If this screen is displayed, call the person responsible to operation of KOMTRAX in your Komatsu distributor and ask for remedy.

O (Special operation) Function of checking display of LCD (Liquid Crystal Display) Function of checking service meter Function of changing attachment/maintenance pass- word 6 PC210, 230, 240-8 Display pattern A B C D E Display of KOMATSU logo 1 1 1 1 1 Display of inputting password 2 — — — — Display of check of breaker mode — — 2 — — Display of check before starting 3 2 3 2 2 Display of warning after check before starting — — — 3 — Display of ending of maintenance interval — — — — 3 Display of check of working mode and travel speed 4 3 4 4 4 Display of ordinary screen 5 4 5 5 5 Display of end screen Selection of auto-deceleration Selection of working mode Selection of travel speed Operation to stop alarm buzzer Operation of windshield wiper Operation of windshield washer Operation of air conditioner/heater Operation to display camera mode (if camera is installed) Operation to display clock and service meter Check of maintenance information Setting and display of user mode (including KOMTRAX messages for user) Display of energy-saving guidance Display of caution monitor Display of automatic judgment of breaker Display of user code and failure code