Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

30 Testing and adjusting UEN00229-00 Display of inputting password After the KOMATSU logo is displayed, the screen to input the engine start lock password is displayed. a This screen is displayed only when the engine start lock function is set effective. a If the password is input normally, the screen changes to “Display of check of breaker mode (if B mode is set)” or “Display of check before starting”. a The machine monitor has some password functions other than the engine start lock. Those functions are independent from one another. Display of check before starting When the screen changes to the check-before- starting screen, the check before starting is carried out for 2 seconds.

a If any abnormality is detected by the check before starting, the screen changes to “Display of warning after check before starting” or “Dis- play of ending of maintenance interval”. a If no abnormality is detected by the check before starting, the screen changes to “Display of check of working mode and travel speed”. a The monitors (6 pieces) displayed on the screen are the items under the check before starting. Display of check of breaker mode When the starting switch is turned ON, if the work- ing mode is set to the breaker mode [B], a message to inform the operator of starting in the breaker mode is displayed on the screen.

k If an attachment other than the breaker is used while the working mode is set to the breaker mode [B], the machine may move unexpectedly or may not operate normally or the hydraulic components may be dam- aged. a After operation to check of the breaker mode is finished, the screen changes to “Display of check before starting”. If No is selected: Working mode is set to econ- omy mode [E] If Yes is selected: Working mode is set to breaker mode [B] PC210, 230, 240-8 7