Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting Display of warning after check before starting If any abnormality is detected by the check before starting, the warning monitor is displayed on the screen. a The following figure shows that the engine oil level monitor (a) is warning of low of engine oil level. Display of check of working mode and travel speed If the check before starting is finished normally, the screen to check the working mode and travel speed is displayed for 2 seconds. a After display of check of the working mode and travel speed is finished, the screen changes to “Display of ordinary screen”.

Display of ending of maintenance interval When the check before starting is carried out, if a maintenance item is near or after the end of the set interval, the maintenance monitor is displayed for 30 seconds to urge the operator to maintenance. a This screen is displayed only when the mainte- nance function is effective. The color of the maintenance monitor (yellow or red) indicates the length of the time after the maintenance interval. a Set or change the maintenance function in the service mode. a After display of this screen is finished, the screen changes to “Display of check of work- ing mode and travel speed”.

Display of ordinary screen If the machine monitor starts normally, the ordinary screen is displayed. a Service meter (a) or a clock is displayed at the center upper section of the screen (The ser- vice meter or clock is selected with [F4]). a ECO gauge (b) is displayed at the right end of the screen (It is turned ON and OFF in the ser- vice mode). 8 PC210, 230, 240-8