Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

30 Testing and adjusting UEN00229-00 Display of end screen When the starting switch is turned OFF, the end screen is displayed for 5 seconds. a Another message may be displayed on the end screen, depending on the message dis- play function of KOMTRAX. Selection of working mode Select a working mode according to the following procedure. 1. While the ordinary screen is displayed, press the working mode selector switch, and the working mode selection screen is displayed. a The following figure is the working mode selection screen displayed when "With attachment" is set (If "With attachment" is not set in the service mode, the attach- ment mode [ATT] is not displayed).

Selection of auto-deceleration While the ordinary screen is displayed, if the auto- deceleration switch is pressed, large auto-deceler- ation monitor (a) is displayed for 2 seconds and the setting of the auto-deceleration is changed. a Each time the auto-deceleration switch is pressed, the auto-deceleration is turned ON and OFF alternately. a If the auto-deceleration is turned ON, large monitor (a) and auto-deceleration monitor (b) are displayed simultaneously. a If the auto-deceleration is turned OFF, auto- deceleration monitor (b) goes off. 2. Operate the function switches or working mode selector switch to select and confirm the work- ing mode which you will use. Function switches q [F3]:

Move to lower working mode q [F4]: Move to upper working mode q [F5]: Cancel selection and return to ordi- nary screen q [F6]: Confirm selection and return to ordi- nary screen Working mode selector switch q Press: Move to lower working mode q Hold down:Confirm selection and return to ordinary screen a If you do not touch any of the function switches and working mode selector switch for 5 seconds, the selection is con- firmed and the screen changes to the ordi- nary screen. PC210, 230, 240-8 9