30 Testing and adjusting UEN00229-00 Display of automatic judgment of breaker If the operator performs breaker work in an improper working mode, the breaker automatic judgment screen is displayed to urge the operator to select a proper working mode. a The breaker automatic judgment is displayed when the following condition is satisfied while the display setting is set effective in the service mode. a Condition for display: When the pump controller measures the rear pump pressure for a certain time, the obtained value is similar to the pulsation wave form of breaker operation which is held in the control- ler in advance.
a The breaker automatic judgment function is set to Not used (Not displayed) when delivered. a If this screen is displayed, check the setting of the working mode. If the breaker is being used, select the breaker mode [B]. a To return to the ordinary screen, press [F5]. Display of user code and failure code If an abnormality which displays a user code and a failure code occurs on the ordinary screen or cam- era mode screen, all the information of the abnor- mality is displayed. (a): User code (3 digits) (b): Failure code (5 or 6 digits) (c): Telephone mark (d): Telephone No. a This screen is displayed only when an abnor- mality (failure code) for which a user code is set occurs.
a The telephone mark and telephone No. are displayed only when the telephone No. is reg- istered in the service mode. a If multiple abnormalities occur simultaneously, all the codes are displayed repeatedly in order. a Since the information of the displayed failure code is recorded in the abnormality record in the service mode, check the details in the ser- vice mode. a When the caution monitor is also displayed, the telephone mark is not displayed. PC210, 230, 240-8 15