Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting a Remedies given by displayed user codes to operator to take (The following table is an excerpt from the Operation and Maintenance Manual) 16 PC210, 230, 240-8 User code Failure mode Action E02 Pump control system error When emergency pump drive switch is at the up (emergency) position, normal operations become possible, but have inspection carried out immediately. E03 Swing brake system error Move the swing brake cancel switch up to release the brake. When applying the swing brake, operate the swing lock switch manually. Depending on the cause of the problem, it may not be possible to release it. In any case, have inspection carried out immediately.

E10 Engine controller power source error Engine controller drive system circuit error (engine stopped) Have inspection carried out immediately. E11 Engine controller system error Output reduced to protect engine Operate machine to a safe posture and have inspection carried out immediately. E14 Abnormality in throttle system Operate machine to a safe posture and have inspection carried out immediately. E15 Engine sensor (coolant temperature, fuel pressure, oil pressure) system error Operations are possible, but have inspection carried out immediately. E0E Network error Operate machine to a safe posture and have inspection carried out immediately.