Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting t Service mode To change the operator mode to the service mode, perform the following operation. This operation is always required when you use the service mode. a The items which can be selected in the service menu are as follows (including some items which need special opera- tions). 1. Check of display of screen and operation of switches While the ordinary screen is displayed, perform the following operation with the numeral input switches. q Operation of switches (While pressing [4], perform the operation in order): [4] + [1] o [2] o [3] a This operation of the switches is accepted only while the ordinary screen is displayed. 2.

Selection of service menu When the Service menu screen is displayed, the service mode is selected. Select a service menu you use with the function switches or numeral input switches. q [F3]: Move to lower menu q [F4]: Move to upper menu q [F5]: Return to ordinary screen (operator mode) q [F6]: Confirm selection a You may enter a 2-digit code with the numeral input switches to select the menu of that code and confirm it with [F6].

20 PC210, 230, 240-8 01 Monitoring 02 Abnormality record Mechanical systems Electrical systems Air-conditioning system/Heater system 03 Maintenance record 04 Maintenance mode change 05 Phone number entry 06 Default Working mode with key ON Setting of unit With/Without attachment Setting of attachment/ maintenance password Setting of camera Setting of ECO display Setting of automatic judgment of breaker Pump absorption torque (F) 07 Adjustment Pump absorption torque (R) Setting of travel Lo speed Adjustment of flow to attachment in compound operation 08 Reduced cylinder mode operation 09 No-injection cranking 10 Display of fuel consumption 11 Display of KOMTRAX Setting condition of terminal Condition of positioning and communication MODEM S/N (Model TH300) MODEM IP address (Model TH200)