Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

30 Testing and adjusting UEN00229-00 Monitoring The machine monitor can monitor the condition of the machine in real time by receiving signals from various switches, sensors, and actuators installed to many parts of the machine and the information from the controllers which are controlling switches, etc. 1. Selecting menu Select “Monitoring” on the service menu screen. 3. Deciding monitoring items After selecting monitoring items, execute moni- toring with the function switch or numeral input switch. a Execution with function switch: Double- click or hold down [F6] (about 2 seconds). a Execution with numeral input switch: Input [99999] and press [F6].

a When monitoring only 2 items, for exam- ple, select them and confirm with [F6]. If [F6] is pressed once more at this time, monitoring is executed. a If monitoring items are selected up to the limit number, monitoring is executed auto- matically. 2. Selecting monitoring items After the “Monitoring selection menu screen” is displayed, select items to be monitored with the function switches or numeral input switches. q [F1]: Move to next page (screen) q [F2]: Move to previous page (screen) q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Reset input numeral/Return to ser- vice menu screen q [F6]: Confirm selection a Selection with function switches:

Select an item with [F3] or [F4] and confirm it with [F6]. a Selection with numeral input switches: Enter a 5-digit code, and the item of that code is selected directly. Confirm that item with [F6]. a If the color of the selected box changes from yellow to red, selection of the item of that box is confirmed. a Up to 6 monitoring items can be selected at a time. You may not able to set up to 6 items, however, depending on the display form of those items. PC210, 230, 240-8 21