30 Testing and adjusting UEN00229-00 4. Resetting abnormality record The contents of the mechanical system abnormality record cannot be reset. Abnormality record (Electrical systems) The machine monitor classifies and records the abnormalities which occurred in the past or which are occurring at present into the mechanical sys- tems, electrical systems, and air-conditioning sys- tem. To check the electrical system abnormality record, perform the following procedures. 3. Information displayed on “abnormality record” screen On the “Electrical systems” screen, the follow- ing information is displayed. (a) : Occurrence order of abnormalities from latest one/Total number of records (b) :
Failure code (c) : Contents of trouble (d) : Number of occurrence time (e) : Service meter reading at first occurrence (f) : Service meter reach at last occurrence 1. Selecting menu Select “Abnormality record” on the service menu screen. q [F1]: Move to next page (screen) (if dis- played) q [F2]: Move to previous page (screen) (if displayed) q [F3]: Move to lower item q [F4]: Move to upper item 2. Selecting sub menu After the “Abnormality record” screen is dis- played, select “Electrical systems” with the function switches or numeral input switches. q [F5]: Return to “abnormality record” screen a If no abnormality record is recorded, "No abnormality record" is displayed.
a If the number of occurrence time is 1 (first occurrence), the service meter reading at the first occurrence and that at the last occurrence are the same. a If [ E ] is displayed on the left of a failure code, the abnormality is still occurring or resetting of it has not been confirmed. a For all the failure codes that the machine monitor can record, see the failure codes table. q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Return to service menu screen q [F6]: Confirm selection a You may enter a 2-digit code with the numeral input switches to select the record of that code and confirm it with [F6].
a The following figure shows the display of the air conditioner specification. The heater specification and heaterless speci- fication are different from each other in the display of "03 Air-conditioning system", which may not be displayed in the heater- less specification. PC210, 230, 240-8 27