30 Testing and adjusting UEN00229-00 Abnormality record (Air-conditioning abnormal- ity record/Heater abnormality record) The machine monitor classifies and records the abnormalities which occurred in the past or which are occurring at present into the mechanical sys- tems, electrical systems, and air-conditioning abnormalities or heater abnormalities. To check the air-conditioning abnormality record or heater abnormality record, perform the following procedures. a All the following figures show the air condi- tioner specification. 3. Information displayed on “abnormality record” screen On the air-conditioning system or heater sys- tem screen, the following information is dis- played. (a):
System/Component name (b): Number of occurrence time (c): Condition (Normal or abnormal) q [F2]: Reset abnormality record q [F5]: Return to abnormality record screen a If [ E ] is displayed on the left of a condition, the abnormality is still occurring or reset- ting of it has not been confirmed. a If CAN disconnection is displayed in Com- munication condition, communication can- not be carried out normally. Accordingly, the conditions of other items are turned OFF. 1. Selecting menu Select “Abnormality record” on the service menu screen. 2.
Selecting sub menu After the “Abnormality record” screen is dis- played, select air-conditioning system or heater system with the function switches or numeral input switches. 4. Resetting abnormality record While the “abnormality record” screen is dis- played, press [F2], and the number of occur- rence time of abnormality is reset. If it is confirmed at this time that the abnormality has been reset, the display changes to Normal. q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Return to service menu screen q [F6]: Confirm selection a You may enter a 2-digit code with the numeral input switches to select the record of that code and confirm it with [F6].
a Heater specification In the heater specification, the display of Air- conditioning is replaced with Heater and the items which are not related to the heater are not displayed. a Heaterless specification In the heaterless specification, the abnormality record menu and screen are not displayed. PC210, 230, 240-8 33