Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting Maintenance record The machine monitor records the maintenance information of the filters, oils, etc., which the opera- tor can display and check by the following opera- tions. When maintenance is carried out, if the data are reset in the operator mode, the number of the times of maintenance is recorded in this section. a The following items can be selected in the maintenance record.

01 Engine oil change 02 Engine oil filter change 03 Fuel main filter change 41 Fuel pre-filter change 04 Hydraulic oil filter change 05 Hydraulic tank breather change 06 Corrosion resistor change 07 Damper case service 08 Final drive case oil change 09 Machinery case oil change 10 Hydraulic oil change 1. Selecting menu Select “Maintenance record” on the service menu screen. 3. Items displayed on maintenance record screen The following items are displayed. (a) : Maintenance items (b) : Number of times of replacement up to now (c) : Service meter reading (SMR) at previous replacement 2.

Selecting maintenance record item After the “Maintenance record” screen is dis- played, select an item to be checked with the function switches or numeral input switches. q [F1]: Move to next page (screen) q [F2]: Move to previous page (screen) q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Return to service menu screen a You may enter a 2-digit code with the numeral input switches to select the item of that code. 34 PC210, 230, 240-8