Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

30 Testing and adjusting UEN00229-00 Setting of telephone No. The telephone No. displayed when the user code/ failure code is displayed in the operator mode can be input and changed according to the following procedure. If a telephone No. is not input with this function, no telephone No. is displayed in the operator mode. a If [F6] is pressed without inputting a digit, there is not information of telephone No. Accordingly, no telephone No. is displayed in the operator mode. 1. Selecting menu Select “Phone number entry” on the service menu screen. 2. Registering and changing telephone No. After the “Phone number entry” screen is dis- played, register or change the telephone No. q [F2]:

Reset all input No. q [F3]: Move to left position (if not blank) q [F4]: Move to right position (if not blank) q [F5]: Reset input digit/Return to service menu q [F6]: Confirm input a Up to 14 digits can be input from the left. Input nothing in the surplus positions. a If one of the input digits is wrong, move to that digit (orange background) and over- write it with the correct digit. PC210, 230, 240-8 37