Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Special functions of machine monitor

UEN00229-00 30 Testing and adjusting Default (Working mode with key ON) Check or change various settings related to the machine monitor and machine by "Default". The function of working mode with key ON is used to set the working mode displayed on the machine monitor when the starting switch is turned ON. q Mode at previous key-OFF: Final mode in previous operation is displayed when key is ON q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Cancel selection and return to “Default” screen 1. Selecting menu Select “Default” on the service menu screen. q [F6]: Confirm selection and return to “Default” screen a When the machine is delivered, Mode at previous key-OFF is set.

a If "With attachment" is not set, the attach- ment mode cannot be selected. a While Attachment mode [ATT] is selected, if "Without attachment" is set, Power mode [P] is displayed when the key is turned ON. a If the engine is stopped while breaker mode [B] is selected in the operator mode, Breaker mode [B] is always displayed, regardless of the above setting. 2. Selecting sub menu After the “Default” screen is displayed, select “Key-on mode” with the function switches or numeral input switches. a Select this item similarly to an item on the Service menu screen. 3. Selecting mode After the “Key-on mode” screen is displayed, select the mode to be set with the function switches. q Power mode:

[P] is displayed when key is ON q Economy mode: [E] is displayed when key is ON q Lifting mode: [L] is displayed when key is ON q Breaker mode: [B] is displayed when key is ON q Attachment mode: [ATT] is displayed when key is ON 38 PC210, 230, 240-8