UEN00229-00 30 Testing and adjusting Adjustment (Setting of Attachment flow adjust- ment) The operator can adjust various items related to the machine with the machine monitor. The function of "Attachment Flow Adjustment" is used to finely adjust the oil flow to the attachment in compound operation. 1. Selecting menu Select "Adjustment" on the service menu screen. 3. Selecting distribution of oil flow After the screen of "Attachment Flow Adjust- ment" is displayed, select a set value on the right side with the function switches. q Set value: For actual distribution of flow, see table q [F3]: Increase set value q [F4]: Decrease set value q [F6]:
Confirm setting and return to Adjust- ment menu screen a The 3 digits on the left side do not vary since they are the code of this function. 2. Selecting sub menu After the Adjustment screen is displayed, select "Attachment Flow Adjustment" with the function switches or numeral input switches. a Select this item similarly to an item on the Service menu screen. a Relationship between set value and distri- bution of flow to attachment 48 PC210, 230, 240-8 Set Code value Distribution of flow to attachment 000 001 044 002 003 50 % 70 % 100 % 40 %