Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Failure code [B@BAZK] Eng Oil Level Low

UEN00240-00 40 Troubleshooting Failure code [B@BAZG] Eng Oil Press. Low 1 Failure code [B@BAZK] Eng Oil Level Low 1 18 PC210, 230, 240-8 User code Failure code Trouble Engine oil pressure low (Engine controller system) — B@BAZG Contents of trouble • While engine was running, signal circuit of engine oil pressure switch detected low engine oil pres- sure (sensor contact opened). Action of controller • Displays engine oil pressure monitor on machine monitor. • If cause of failure disappears, system resets itself. Problem that appears on machine • If machine is operated as it is, engine may be damaged.

Related infor- mation • Engine oil pressure switch signal is input to engine controller and then transmitted to machine moni- tor. • Method of reproducing failure code: Start engine. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of engine oil pres- sure (when system is nor- mal) Engine oil pressure may be low. Check it and remove cause if it is low. 2 Defective engine oil pressure monitor system If cause 1 is not detected, engine oil pressure monitor system may be defective. Carry out troubleshooting for "E-8 Emergency stop item lights up while engine is running" in E-mode.

User code Failure code Trouble Engine oil level low (Machine monitor system) — B@BAZK Contents of trouble • When starting switch is turned ON (but engine is not started), signal circuit of engine oil level switch detected low engine oil level (sensor contact opened). Action of machine monitor • Displays engine oil level monitor on machine monitor. • Even if cause of failure disappears, system does not reset itself until starting switch is turned OFF. Problem that appears on machine • If machine is operated as it is, engine may be damaged. Related infor- mation • Engine oil level switch signal can be checked with monitoring function. (Code:

04501 Monitor input 2) • Method of reproducing failure code: Turn starting switch ON. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of engine oil level (when system is normal) Engine oil level may be low. Check it and add new oil if it is low. 2 Defective engine oil level monitor system If cause 1 is not detected, engine oil level monitor system may be defective. Carry out troubleshooting for "E-2 Basic check item lights up when starting switch is turned ON (but engine is not started)" in E-mode.