Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Failure code [CA111] EMC Critical Internal Failure

UEN00240-00 40 Troubleshooting Failure code [B@HANS] Hydr Oil Overheat 1 Failure code [CA111] EMC Critical Internal Failure 1 20 PC210, 230, 240-8 User code Failure code Trouble Hydraulic oil overheat (Pump controller system) — B@HANS Contents of trouble • While engine was running, signal circuit of hydraulic oil temperature sensor detected overheating of hydraulic oil (above about 102°C). Action of controller • Displays hydraulic oil temperature monitor with red on machine monitor. • If cause of failure disappears, system resets itself. Problem that appears on machine • If machine is operated as it is, engine may be seized.

Related infor- mation • Hydraulic oil temperature sensor signal is input to engine controller and then transmitted to machine monitor. • Hydraulic oil temperature can be checked with monitoring function (Code: 04401 Hydraulic oil temperature) • Method of reproducing failure code: Start engine. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheating of hydraulic oil (when system is normal) Hydraulic oil may be overheating. Check it and remove cause if it is overheating. 2 Defective hydraulic oil tem- perature gauge system If cause 1 is not detected, hydraulic oil temperature gauge system may be defective.

Carry out troubleshooting for "E-10 Hydraulic oil temperature gauge does not work normally" in E-mode. User code Failure code Trouble Critical internal failure (Engine controller system) E10 CA111 Contents of trouble • Memory or power supply circuit in engine controller is defective. Action of controller • None in particular. Problem that appears on machine • Engine does not start. Related infor- mation Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective engine controller Engine controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)