UEN00241-00 40 Troubleshooting Failure code [CA435] Eng Oil Press Sw Error 1 Circuit diagram related to engine oil pressure switch 14 PC210, 230, 240-8 User code Failure code Trouble Engine oil pressure switch error (Engine controller system) E15 CA435 Contents of trouble • There is error in signal circuit of engine oil pressure switch. Action of controller • None in particular. Problem that appears on machine • Engine protection function based on engine oil pressure does not work. • Engine oil pressure monitor does not display normally Related infor- mation • Method of reproducing failure code: Turn starting switch ON or start engine.
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Defective engine oil pressure 1 switch a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. OIL PRESSURE SWITCH (male) Resistance Between (1) – chassis ground Max. 10 z Disconnection in wiring har- ness (Disconnection in wiring 2 or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (17) Resis- – OIL PRESSURE SWITCH (male) (1) tance Max.
10 z Short circuit in wiring har- 3 ness (with another wiring harness) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CE01 (female) (17) Resis- – each of CE01 (female) pins (With all wiring tance harness connectors disconnected) Min. 100 kz Defective wiring harness 4 connector Connecting parts between engine oil pressure switch – engine wir- ing harness – engine controller may be defective. Check them directly.
• Looseness of connector, breakage of lock, or breakage of seal • Corrosion, bend, breakage, push-in, or expansion of pin • Moisture or dirt in connector or defective insulation 5 Defective engine controller a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. CE01 (female) Resistance Between (17) – chassis ground Max. 10 z