UEN00244-00 40 Troubleshooting Circuit diagram related to engine oil level switch 10 PC210, 230, 240-8 Trouble (2) Engine oil level monitor lights up red. Related infor- mation • Condition of engine oil level switch signal can be checked with monitoring function. (Code: 04501 Monitor input 2) Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Lowering of engine oil level (When system is normal) Engine oil level may be low. Check it and add oil if necessary. 2 Defective engine oil level switch (Internal disconnec- tion) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
P44 (male) Engine oil level Resistance Between (1) – chassis ground Between H – L Max. 1 z Below L Min. 1 Mz 3 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between CM02 (female) (2) – P44 (female) (1) Resis- tance Max. 1 z 4 Defective machine monitor a Prepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. CM02 Engine oil level Voltage Between (2) – chassis ground Between H – L Max. 1 V Below L 20 – 30 V