40 Troubleshooting UEN00244-00 Circuit diagram related to arm dump PPC pressure switch PC210, 230, 240-8 59 Trouble (6) Arm dump operation is not displayed normally by monitoring function. Related inf mation or- • Monitoring code:
01900 Pressure switch 1 Possible cau and standa value in nor state Cause Defective arm dump PPC 1 pressure switch (Internal dis- connection or short circuit) Disconnection in wiring har- ness (Disconnection in wiring 2 or defective contact in con- nector) ses rd mal Ground fault in wiring har- 3 ness (Short circuit with GND circuit) Hot short (Short circuit with 4 24V circuit) in wiring harness 5 Defective pump controller Standard value in normal state/Remarks on troubleshooting efective arm dump PPC ressure switch (Internal dis- onnection or short circuit) a Prepare with starting switch OFF, then start engine and carry out troubleshooting.
P08 (male) Left work equipment control lever Resistance Between (1) – (2) Neutral Min. 1 Mz Arm dump Max. 1 z isconnection in wiring har- ess (Disconnection in wiring r defective contact in con- ector) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON. Wiring harness between C01 (female) (15) – P08 (female) (1) Resis- M tance ax. 1 z Wiring harness between P08 (female) (2) – chassis ground (T10) Resis- M tance ax. 1 z round fault in wiring har- ess (Short circuit with GND ircuit) a Prepare with starting switch OFF, then carry out troubleshooting without turning starting switch ON.
Wiring harness between C01 (female) (15) – P08 (female) (1) Resis- M tance in. 1 Mz ot short (Short circuit with 4V circuit) in wiring harness a Prepare with starting switch OFF, then turn starting switch ON and carry out troubleshooting. Wiring harness between C01 (female) (15) – P08 (female) (1) Voltage M ax. 1 V efective pump controller a Prepare with starting switch OFF, then start engine and carry out troubleshooting. C01 (female) Left work equipment control lever Resistance Between (15) – chassis ground Neutral Min. 1 Mz Arm dump Max. 1 z