Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — H-25 Upper structure overruns remarkably when it stops swinging

UEN00245-00 40 Troubleshooting H-25 Upper structure overruns remarkably when it stops swinging 1 28 PC210, 230, 240-8 Trouble (1) Upper structure overruns remarkably when it stops swinging in both directions. Related information • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective adjustment or malfunction of swing motor (safety valve) • Prepare with engine stopped, then run engine at high idle and carry out troubleshooting.

Swing lock switch Left work equipment control lever Swing relief pressure ON Swing relief 28.9 – 32.9 MPa {295 – 335 kg/cm2} If oil pressure does not become normal after adjustment, swing motor safety valve may have malfunction or internal defect. Check safety valve directly. 2 Defective swing motor a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Swing lock switch Left work equipment control lever Leakage from swing motor ON Swing relief Max. 10 l/min Trouble (2) Upper structure overruns remarkably when it stops swinging in only one direction. Related information • Carry out all troubleshooting in power mode (P) of working mode.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of swing PPC valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Left work equipment control lever PPC valve output pressure Neutral 0 MPa {0 kg/cm2} Left swing Right swing 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Clogging of swing PPC slow return valve Swing PPC slow return valve may have malfunction. Check it directly. a Slow return valves on right side and left side may be checked by replacing them with each other and seeing change of condi- tion.

3 Malfunction of swing control valve (spool) Spool of swing control valve may have malfunction. Check it directly. 4 Malfunction of swing motor (suction valve) Suction valve of swing motor may have malfunction. Check it directly. a Suction valves on right side and left side may be checked by replacing them with each other and seeing change of condition. 5 Malfunction of swing motor (check valve) Check valve of swing motor may have malfunction. Check it directly. a Check valves on right side and left side may be checked by replacing them with each other and seeing change of condition.