40 Troubleshooting UEN00245-00 H-24 Swing acceleration or swing speed is low 1 PC210, 230, 240-8 27 Trouble (1) Swing acceleration or swing speed is low in both directions. Related information • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of swing control valve (spool) Spool of swing control valve may have malfunction. Check it directly. 2 Malfunction of all control valves (LS shuttle valves) LS shuttle valves of all control valves may have malfunction. Check them directly.
3 Malfunction of swing motor (parking brake) Parking brake of swing motor may have malfunction. Check it directly. 4 Defective adjustment or malfunction of swing motor (safety valve) a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Swing lock switch Left work equipment control lever Swing relief pressure ON Swing relief 28.9 – 32.9 MPa {295 – 335 kg/cm2} If oil pressure does not become normal after adjustment, swing motor safety valve may have malfunction or internal defect. Check safety valve directly. 5 Defective swing motor a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting.
Swing lock switch Left work equipment control lever Leakage from swing motor ON Swing relief Max. 10 l/min 6 Defective swing machinery Swing machinery may have internal defect. Check it directly. a It may be check by abnormal sound, abnormal heating, metal chips in drain oil, etc. Trouble (2) Swing acceleration or swing speed is low in only one direction. Related information • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of swing PPC valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting.
Left work equipment control lever PPC valve output pressure Neutral 0 MPa {0 kg/cm2} Left swing Right swing 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of swing control valve (spool) Spool of swing control valve may have malfunction. Check it directly. 3 Malfunction of swing control valve (pressure compensa- tion valve) Pressure compensation valve of swing control valve may have mal- function. Check it directly. 4 Malfunction of swing motor (suction valve) Suction valve of swing motor may have malfunction. Check it directly. a Suction valves on right side and left side may be checked by replacing them with each other and seeing change of condition.
5 Malfunction of swing motor (check valve) Check valve of swing motor may have malfunction. Check it directly. a Check valves on right side and left side may be checked by replacing them with each other and seeing change of condition.