Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — H-23 Upper structure does not swing

UEN00245-00 40 Troubleshooting 26 PC210, 230, 240-8 Trouble (2) Upper structure swings only in one direction. Related information • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of swing PPC valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Left work equipment control lever PPC valve output pressure Neutral 0 MPa {0 kg/cm2} Left swing Right swing 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of swing control valve (spool) Spool of swing control valve may have malfunction. Check it directly.

3 Malfunction of swing motor (suction valve) Suction valve of swing motor may have malfunction. Check it directly. a Suction valves on right side and left side may be checked by replacing them with each other and seeing change of condition. 4 Malfunction of swing motor (check valve) Check valve of swing motor may have malfunction. Check it directly. a Check valves on right side and left side may be checked by replacing them with each other and seeing change of condition.