UEN00245-00 40 Troubleshooting H-28 Hydraulic drift of swing is large 1 30 PC210, 230, 240-8 Trouble (1) Hydraulic drift of swing is large (when swing holding brake is applied). Related information • When swing lock switch is turned ON or when swing holding brake release switch is in normal posi- tion, swing holding brake operates and upper structure is fixed with disc brake. • Carry out all troubleshooting in power mode (P) of working mode.
Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of swing holding brake solenoid valve a Prepare with engine stopped, then run engine at high idle and carry out troubleshooting. Left work equipment control lever Swing holding brake solenoid valve output pressure Neutral 0 MPa {0 kg/cm2} Left swing Right swing 2.9 MPa {30 kg/cm2} 2 Malfunction of swing motor (parking brake) Parking brake of swing motor may have malfunction. Check it directly. Trouble (2) Hydraulic drift of swing is large (when swing holding brake is released).
Related information • When swing holding brake release switch is in release position, swing holding brake is released and upper structure is secured by only hydraulic pressure. • Carry out all troubleshooting in power mode (P) of working mode. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction or defective seal of swing control valve (spool) Swing control valve spool may have malfunction or defective seal. Check it directly. 2 Defective seal of swing con- trol valve (pressure compen- sation valve) Seal of pressure compensation valve of swing control valve may be defective. Check it directly.
3 Defective seal of swing motor (safety valve) Seal of safety valve of swing motor may be defective. Check it directly. 4 Defective seal of swing motor (suction valve) Seal of suction valve of swing motor may be defective. Check it directly. 5 Defective seal of swing motor (check valve) Seal of check valve of swing motor may be defective. Check it directly. 6 Defective seal of swing motor (shockless valve) Seal of shockless valve of swing motor may be defective. Check it directly.