Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — How to read this manual

50 Disassembly and assembly UEN00659-00 Disassembly 2. Disassembly and assembly of assem- blies q In Disassembly section, the work procedures, precautions and know-how for carrying out those procedures, and quantity of the oil and coolant drained are described. Special tools q Special tools which are deemed neces- sary for removal or installation of parts are described as A1 X1 etc. and their part names, part numbers and quantities are described in the special tool list. q The meanings of the symbols used in Disas- sembly section are as follows. k : This mark indicates safety-related precau- tions that must be followed when imple- menting the work. a :

Know-how or precautions for work q Also the following information is described in the special tool list. 1) Necessity t : Special tools that cannot be substi- tuted and should always be used (installed). q : Special tools that will be useful if avail- able and are substitutable with com- mercially available tools. 2) Distinction of new and existing special tools N : Tools newly developed for this model. They respectively have a new part number. R : Tools with upgraded part numbers. They are remodeled from already available tools for other models. Blank: Tools already available for other models. They can be used without any modification. 3) Circle mark Q in sketch column: 6 :

Quantity of oil or coolant drained Assembly q In Assembly section, the work procedures, pre- cautions and know-how for carrying out those procedures, and quantity of the oil and coolant added are described. q The meanings of the symbols used in Assem- bly section are as follows. k : Precautions related to safety in execution of work 1 : Work that must be carried out with ex- treme care for safety of machine. a : Know-how or precautions for work 2 : Type of coating material 3 : Tightening torque 5 : Quantity of oil or coolant to be added q The sketch of the special tool is pre- sented in the section of "Sketches of special tools".

Sketches of special tools q Various special tools are illustrated for the con- venience of local manufacture. * *** **** q Part No. of special tools starting with 79 T- - : means that they can not be supplied from Komatsu in Japan (i.e. locally made parts). a General tools that are necessary for removal or installation are described as [1],[2]•••etc. and their part names, part numbers and quantities are not described. PC210, 230, 240-8 3