Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of fuel injector assembly

50 Disassembly and assembly UEN00660-00 a (9) – (13): Unused numbers 8. Disconnect fuel return hose (14). [*3] 9. Disconnect fuel return hose (15). 10. Disconnect bracket (16). [*4] 11. Remove fuel block (17). [*5] 12. Disconnect connector (18). a Pull out connector (18) in the direction of the arrow while pushing up its lock with flat-head screwdriver [1]. 13. Disconnect connector (19). a As you cannot hold the connector, remove it as follows, using two flat-head screw- drivers. 1) Keep pushing the lock of connector (19) with flat-had screwdriver [1]. 2) Insert flat-head screwdriver [2] to the gap between the left or right side of the lock and the connector.

Then twist the screw- driver from side to side gently to remove the connector gradually. a Keep electrical intake air heater (H) drawn to the counterweight side. a Keep the harness drawn to the counterweight side. [*6] PC210, 230, 240-8 5