Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of cylinder head assembly

UEN00660-00 50 Disassembly and assembly [*14] a Tighten the bolts in the order shown below. 3 Exhaust manifold mounting bolt: First time: in the order of [1] – [12] Tighten to a torque of 24 ± 4 Nm {2.4 ± 0.4 kgm}. Second time: in the order of [2] – [12] Tighten to a torque of 53 ± 6 Nm {5.4 ± 0.6 kgm}. Third time: in the order of [1] – [4] Tighten to a torque of 53 ± 6 Nm {5.4 ± 0.6 kgm}. [*15] 3 Fan mounting bolt: 43 ± 6 Nm {4.4 ± 0.6 kgm} [*16] a Refer to the Inspection and Adjustment of Air Compressor Belt Tension section in the Testing and adjusting chapter of this manual. q Refilling engine coolant Refill water through the water filler port up to the specified level.

Start the engine and circu- late the water, and then check the water level. 5 Coolant: Approx. 21.4 l 28 PC210, 230, 240-8