Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Disassembly and assembly of final drive assembly

UEN00661-00 50 Disassembly and assembly a PC230-8, PC240LC-8, PC240NLC-8 3. Washer Remove washer (2). Special tools 4. No.1 carrier assembly 1) Remove No. 1 carrier assembly (3). Disassembly 1. Oil drain Remove drain plug to drain the oil from final drive case. 6 Final drive case: 5.4 l 2. Cover Remove 20 mounting bolts and hoist cover (1) using an eyebolt [1] to remove it. a When ring gear (12) is lifted together, sep- arate the ring gear by lightly tapping it with a plastic hammer. 2) Disassemble No. 1 carrier assembly in the following procedure. 1] Drive pin (4) into pin (5) to remove pin (5) from carrier (6). a Remove pin (4) from pin (5) after pin (5) is removed.

2] Remove thrust washer (7), No. 1 planetary gear (8), needle bearing (9) and thrust washer (10). 12 PC210, 230, 240-8 Symbol Part number Part name Necessity Q’ty N/R Sketch J 4 796-427-1200 Wrench t 1 5 791-545-1510 Installer t 1 6 796T-427-122 0 Push tool t 1 Q 790-101-2510 Block t 1 792-104-3940 Bolt t 2 05180-11610 Nut t 2 01613-31645 Washer t 2 790-105-2100 Jack t 1 790-101-1102 Hydraulic pump t 1 7 790-331-1110 Wrench t 1