50 Disassembly and assembly UEN00663-00 Removal and installation of hydraulic tank assembly k Lower the work equipment to the ground completely, after the engine is stopped, loosen the hydraulic tank cap gradually to reduce the pressure inside, and set the lock lever in the lock position. Removal a Attach an identification tag to each piping to avoid a mistake in the position of installation later. 1. Swing to right 45 degree. (For hydraulic tank oil drain) 2. Remove cover (1). 5. Shift cover (3) forward. a Keep away from bolt B. 6. Remove cover (4) and (5). 3. Drain hydraulic tank oil. [*1] 6 Hydraulic tank: Approx. 234 l (PC210, 230) Approx. 239 l (PC240) 4.
See Removal and installation of engine and oil pressure pump assembly to remove flame (2) between hydraulic tank and engine. For that purpose, remove below mainly. q Engine hood q Control valve upper cover q Cover between hydraulic pump and en- gine q Air cleaner upper cover PC210, 230, 240-8 5