Komatsu PC210-8, PC210LC-8, PC210NLC-8, PC230NHD-8, PC240LC-8, PC240NLC-8 — Removal and installation of hydraulic pump assembly

50 Disassembly and assembly UEN00663-00 Installation q Installation is done in the reverse order of removal. [*1] 2 Hydraulic pump involute spline: Anti-friction agent (LM-G) 2 Mating face of the hydraulic pump case: Gasket sealant (LG-6) a Since flywheel housing is made of aluminum, be careful not to over torque. a Impact wrench is not applicable to use. q Refilling with oil (damper case) Refill hydraulic oil through the oil filler port to the specified level. 5 Damper case: EO30-CD Approx. 0.65 l q Refilling with oil (hydraulic tank) Refill hydraulic oil through the oil filler port to the specified level. Let the oil circulate in the hydraulic system by starting the engine.

Then check the oil level again. 5 Hydraulic tank: Approx. 234 l (PC210, 230) Approx. 239 l (PC240) 3 Hydraulic tank drain plug: 58.8 – 78.5 Nm {6.0 – 8.0 kgm} q Air bleeding Bleed the air from the circuit between the valve and the hydraulic cylinder. For details, see Testing and adjusting, air bleeding of various parts. PC210, 230, 240-8 21