UEN00663-00 50 Disassembly and assembly Removal and installation of oil seal in hydraulic pump input shaft Installation q Installation is done in the reverse order of removal. Special tools [*1] 2 Oil seal lip portion: Grease (G2-LI) 2 Oil seal outer circumference: Grease (G2-LI) a Coat the oil seal outer circumference thinly with grease. a Press fit oil seal (3) with tool S , [1], [2]. Removal 1. Remove the hydraulic pump assembly refer- ring to the section of Removing Hydraulic Pump Assembly. 2. Remove snap ring (1) and then remove spacer (2). 3. Pry off oil seal (3) with a screwdriver. [*1] a Use care in removing the oil seal so that the shaft may not be damaged.
22 PC210, 230, 240-8 Symbol Part number Pa Necessity rt name Q’ty N/R Sketch S 796T-467-2410 Push t ool t 1 N Q