UEN00663-00 50 Disassembly and assembly 8) Assemble the cylinder tube to piston rod assembly (2). a Align axial center of the cylinder tube, then insert. a Check that the ring is not broken and has not come out, then push in fully. 9) Tighten head assembly (1) with mounting bolts. 3 Mounting bolt: * Variable 2 pieces boom specification 10) Install piping. 30 PC210, 230, 240-8 Cylinder name Tightening torque Bucket 270±39Nm {27.5±4.0kgm} Arm 373±54Nm {38.0±5.5kgm} Boom 270±39Nm {27.5±4.0kgm} * Adjust cylinder 892±137Nm {91.0±14.0kgm}