3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS OPERATION Fault No. 812: (815) $h: Faulty pressure switch for oil tank breather filter Help: Closed contact of pressure switch B24 for oil tank breather filter with switched off Engine. - Check pressure switch and cables. Fault No. 818: (821) $h: Faulty pressure switch for return oil filter Help: Closed contact of pressure switch B26 for return oil filter with switched off Engine. - Check pressure switch and cables. Fault No. 824: (827) $h: Faulty pressure switch for leak oil filter Help: Closed contact of pressure switch B25 for leak oil filter with switched off Engine. - Check pressure switch and cables. Fault No. 830: (833) $h:
No 24 V voltage at circuit breaker F13 Help: No 24 V behind circuit breaker F13. - Check circuit breaker F13. - Check current supply to circuit breaker. Fault No. 836 (839) $h: Faulty pressure switch of fan drive oil filter for oil cooler 1 Help: Closed contact of pressure switch B28-1 for oil cooler fan drive filter with switched off engine. - Check pressure switch and cables. Fault No. 842: (845) $h: Hydraulic oil far below operating temperature. Wait for warm-up phase! Help: The machine was taken into operation although the start viscosity was not attained. - Preheat hydraulic oil ! Fault No. 848: (851) $h: Faulty monitor channel for hydraulic oil tempera- ture Help:
Sensor B15 shows inadmissible values. - Check sensor and cables. 182