Komatsu — 3.4.6 FAULT AND INFORMATION MESSAGE LIST

OPERATION 3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS Fault No. 1034: (1037) $h: Central lube system failure Help: Lube cycle is not performed at the given time. - Check lube system for defects. Fault No. 1040: (1043) $h: Central lube system failure Help: The lube lines are not relieved at the given time. - Check valve Y7 and pressure switch B43. - Check injectors. Fault No. 1046: (1049) $h: Swing ring gear lube system grease container empty Help: The message contact B109 grease container empty has responded. - Replace or fill grease container. Fault No. 1052: (1055) $h: Swing ring gear lube system failure Help: Lube cycle is not performed at the given time.

- Check lube system for defects. Fault No. 1058: (1061) $h: Swing ring gear lube system failure Help: The lube lines are not relieved at the given time. - Check valve Y9 and pressure switch B46. - Check injectors. Fault No. 1064: (1067) $h: Faulty pressure switch of gear oil filter for PTO gear 2 Help: Closed contact of pressure switch B27-2 for PTO-gear lubrication filter 2 with switched OFF engine. - Check pressure switch and connected cables. Fault No. 1070: (1073) $h: Faulty pressure switch of fan drive oil filter for oil cooler 2 Help: Closed contact of pressure switch B28-2 for cooler fan drive filter with switched OFF engine. - Check pressure switch and connected cables. 187