OPERATION 3.16 STOPPING THE ENGINES 3.16.1 RELIEVE PRESSURE IN THE HYDRAULIC SYSTEM With the engines at standstill and main switch (1) in ON posi- tion, move all controls for working attachment and crawlers several times through all shift positions to relieve the pres- sure in the hydraulic system. The necessary oil pressure for shifting the spools of the main control valves is provided by a pressure accumulator in the pilot oil circuit. NOTICE The pressure accumulator in the pilot oil circuit serves also for lowering a raised working attachment to the ground with the engines at standstill.
If, for example, the engines stall with the working attachment in a raised position, lowering of the working attachment is possible by operating the respec- tive control lever. 6. Set main switch key (1) to ”0” position and remove. 7. Move lock lever (12) fully to the rear in LOCKED position. 8. Switch off the battery main switches and remove keys. 273 CAUTION CAUTION