Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE WARNING and hoses. If any problem is sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from 3 - 58 Walk-around Checks Before starting the engine, look aro und and under the machine to check for loose nuts and bolts, or le akage of oil, fuel, or coolant, and check conditio n of the work equipment and hydraulic system . Also check for loos e wirin g and play , and accumulation of dust at pl aces with high temperatures. Remove any flammable materials from a round the battery, engine, muffler, turbocharger, or other high temperature engine parts.

Leakage of fuel or oil will cause the mach ine to catch fire. Check carefully, be sure to repair a ny problem, or contact your Ko matsu distributor. Perform the following inspections a nd cleaning every day before starting engine f or the day's 1. Check for damage, wear, play i n work equipment, cylinders, linkage, hoses Check for cracks, excessive w found, repair it. ear, play in wotk equipment, cylinders, linkag 2. Remove dirt and debris from ar ound the engine, battery, and radiator.

Check for dirt accumulated arou nd the engine and radiator.Also check for flam mable material ( dry l eaves, t wigs, etc.) around the battery, engin e muffler, turbocharger, or other high temperature engine parts. If any dirt or remove them. flammable materials are found, For the method of removing dirt f rom the radiator, see "CLEAN AND INSPECT RADIATOR FINS, O IL COOLER FINS, AFTERCOOLER FINS, FUEL COOLER FINS, AND AIR CONDITIONER CONDENSER FINS (only ditioner) (PAGE 4-61)". (only machines equipped with air con 3. Check for coolant and oil leaka ge around the engine i Check for oil leakage from the e ngine and coolant leaks from the cooling syste m. If any problem is found, r epair t. 4.

Check for oil leakage from hydr aulic equipment, hydraulic tank, hoses, and jo Check for oil leakage. If any pro blem is found, repair the area where oil is lea 5. Check the undercarriage (track rollers. If any problem is found, repair it 6. Check for problems in handrails If any problem is found, repair it 7. Check for problem in gauges, m onitor. Check that there is no problem i n the gauges and monitor in the operator's cab . If any problem is fo und, re place the parts. Clean off any dirt on t he surface. 8. Clean, check rear view mirror Check that there is no damage t o the rear view mirror. If it is damaged repair.

C lean the surface of t he mirro r and adjust the angle so that the are a at the rear can be seen from the operator's seat.