Komatsu — ESCAPE FROM MUD

. OPERATION MACHINE OPERATIONS AND CONTROLS increase the pushing power of the boom and make it easier to escape. raise the 3 - 100 ESCAPE FRO Always operate c arefully to avoid getting s tuck in mud. I f the machine does get stuck in mu d, do as follows to ge the machine out. Place the ma Track on One S NOTICE When using the boo m or arm to raise the machi ne, always have t he bottom of t he bucket in con tact with the ground. The an gle between the boom and arm should be 90° t The same applies w hen using the bucket install ed in the reverse direction. When only one s ide is stuck in mud, use the bucket to track, then lay bo ards or logs an d drive th e machine out.

Tracks on Both Sides Stuck are stuck in mud and they slip, When the tracks on both sides making it impossi ble for the machine to mo ve, lay boards or logs as explained above, and dig the bucket into th e ground in fro nt. Then pul l in the arm as in normal digging opera tions and put t he travel levers in the FOR WARD position to pull th e machine out .