Komatsu — RECOMMENDED APPLICATIONS

. OPERATION MACHINE OPERATIONS AND CONTROLS 3 - 101 RECOMMENDED In addition to the follow ing, it is possible to further i ncrease the range of applicat ions by using various attachments Backhoe Work A backhoe is suitable f or excavating areas that are lower t han the machine. When the condition of t he machine is as shown in the diagram on the right (angle betw een [bucket cylinder and link] and [arm 90°), the maximum excavation force is ing force of each cylinder. e this angle effectively to optimize your ing with the arm is from a 45° angle away 30° angle towards the machine. link] an d [ arm cylinder and arm] is orce is obtained from the push ing force of each cylinder.

When excavating, us working efficiency. The range for excavat 45° ang from the machine to a 30° angle towards the mach There may be some differences depending on the excavation depth, but try to stay w ithin the above range rather than o perating the cylinder to the end of its stroke. Shovel Work A shovel is suitable fo r excavating at a position higher than the han the machine. Shovel work is performed by attaching th e buck et in the reverse direction. Ditching Work Ditching work can be performed efficiently by attaching a bucket which matches the dig ging operation and then setting the tracks e ditch to be excavated. itch, first dig both sides and then finally ion.

parallel to the line of th To excavate a wide d remove the center port