. OPERATION TRANSPORTATION Loading bending. the monitor display. switches OFF J ON J OFF in turn. When auto-deceleration switch (1) is turned OFF, display monitor (2) goes out. 3 - 111 1. Load and u nload on firm level gro Maintain a safe distance from the 2. Apply the tr ailer brakes securely, t hen put blocks (1) under the tires to pre vent the trailer from mo Set left and right ramps (2) spaced to the left and ri ght of center (3) of the trailer. ngle of installation (4) a maximum of 1 5°. If the ht of the bend a large amoun t under the weig , put blocks under the ramps to prevent t hem from 3. Set the trav el speed selector swit ch to Lo (low spee d travel).
To switc switch (1 h the travel speed, p ). The travel speed is ress travel spee displayed as Lo, M d selector i, or Hi on 4. Turn auto- deceleration switch (1 ) OFF and operat e the fuel essed, it control dial Each ti to set the engine spee me auto-deceleration d to low idle. switch (1) is pr 5. Turn the sw ing lock switch ON to apply the swing lo ck. When th (3) lights e swing lock switch is turned ON, display monitor up.