Komatsu — RUNNING OUT OF FUEL

. OPERATION TROUBLES AND ACTIONS TROUBLES AND ACTIONS Procedure for Bleeding Air CAUTION more - 100 times until no more (0.5 to 0.7 kgf · m, 3.6 to 5.1 lbft) sound becomes continuous. 3 - 129 RUNNING OUT OF FUEL When sta rting the engine again after running out of fuel, fill w ith fuel, then bleed the air fr om the fuel system before starting t he engine. areful not to run out of fuel. Always w atch the fuel level and be c areful not to run out of fuel I f the eng ine has stopped because of lack of fuel, it is necessary to use the priming pump to bleed the air completely from the fuel circuit.

This en gine consists of higher precisi on parts than on the conventional fuel injection pump and nozzle, so if dirt gets in, it will cause p roblems. If there is any dirt stu ck to the fuel line, use fue l to wash it off completely. Be care ful when opening the air bleed plug at the fuel filter hea d and the air bleeder of the sup ply pump. The system is still under p ressure and fuel may spurt ou 1. Loos en air bleed plug (A), (B) at the fuel filter head (1). 2. Loos en the knob of priming pump (2), then pump the kno no m ore bubbles come out of air 3. Wrap it. 4. Oper bubb 5. Tight les come out with the fuel fr en air bleed plug (B). Tightening torque: 4.9 to 6.9 N·m lbft) ening torque:

4.9 to 6.9 N·m 6. Loos en air bleeder (3) of the sup 7. Pum p priming pump (2) approx. bubbles come out with the fuel fro air bleeder (3). Tightening torque: 4.9 to 6.9 N·m les come out with the fuel fro eeder (3). mes) until the priming p ump (2) becomes stiff and t he overflow valve release