Komatsu — DISCHARGED BATTERY

. OPERATION TROUBLES AND ACTIONS Connecting and Disconnecting Booster Cables WARNING cable, always wear safety structure frame), a spark will be as far away from the battery as exercise good care so that the each other, or they contact the 3 - 135 Starting Engine with Booster C When starting the engine with a boo Whe n connecting the cables, never co (-) te Whe Be c areful not to let the normal machi each other. This prevents sparks from coul d ignite the hydrogen gas given o explodes, it could cause serious injur Be c areful not to make a mistake whe the l possible. (Avoid the work equipment, conductor) When removing the booster cable, Whe booster cable clips may not contact chassis.

NOTICE The starting system for this machine uses 24V. For the normal machine, also use a 24V battery. The size of the booster cable and clip should be suitable for the battry size. The battery of the normal machine m ust be the same capacity as that of the engine to be s tarte Chec k the cables and clips for damag e or corrosion. re firmly connected. g brake levers of both machine are in the LOCK position. AL position. Make sure that the cables and clips a Chec k that the lock levers and parkin g brake levers of both machine are in th e LOCK Chec k that each lever is in the NEUTR